AIM Manual
Motor Maintenance » Single-Phase Motors and Controls (Page 51)
- Menu
- << Page 50
- Page 51
- Page 52 >>
Integral hp Control Box Parts
Table 51 Integral Horsepower Control Box Parts 60 Hz
| MOTOR SIZE | MOTOR RATING HP | CONTROL BOX (1) MODEL NO. | CAPACITORS PART NO. (2) | MFD. | VOLTS | QTY. | OVERLOAD (2) PART NO. | RELAY (3) PART NO. | CONTRACTOR (2) PART NO. |
| 4" | 1 - 1.5 STANDARD | 282 300 8110 (See Note 5) | 275 464 113 S 155 328 102 R | 105-126 10 | 220 370 | 1 1 | 275 411 107 | 155 031 102 | |
| 282 300 8110 (See Note 5) | 275 464 137 S 155 328 101 R | 105-126 15 | 220 370 | 1 1 | 275 411 114 S 275 411 113 M | 155 031 102 | |||
| 282 300 8610 | 275 464 113 S 155 328 101 R | 105-126 15 | 220 370 | 1 1 | None (See Note 4) | 155 031 102 | |||
| 4" | 2 STANDARD | 282 301 8110 | 275 464 137 S 155 328 103 R | 105-126 20 | 220 370 | 1 1 | 275 411 117 S 275 411 113 M | 155 031 102 | |
| 4" | 2 DELUXE | 282 301 8310 | 275 464 137 S 155 328 103 R | 105-126 20 | 220 370 | 1 1 | 275 411 117 S 275 411 113 M | 155 031 102 | 155 325 102 L |
| 4" | 3 STANDARD | 282 302 8110 | 275 463 123 S 155 327 109 R | 208-250 45 | 220 370 | 1 1 | 275 411 118 S 275 411 115 M | 155 031 102 | |
| 4" | 3 DELUXE | 282 302 8310 | 275 463 123 S 155 327 109 R | 208-250 45 | 220 370 | 1 1 | 275 411 118 S 275 411 115 M | 155 031 102 | 155 325 102 L |
| 4" & 6" | 5 STANDARD | 282 113 8110 | 275 468 118 S 155 327 114 R | 216-259 40 | 330 370 | 1 2 | 275 411 119 S 275 406 102 M | 155 031 601 | |
| 4" & 6" | 5 DELUXE | 282 113 9310 | 275 468 118 S 155 327 114 R | 216-259 40 | 330 370 | 1 2 | 275 411 119 S 275 406 102 M | 155 031 601 | 155 326 101 L |
| 6" | 7.5 STANDARD | 282 201 9210 | 275 468 119 S 275 468 117 S 155 327 109 R | 270-324 130-154 45 | 330 330 370 | 1 1 1 | 275 411 102 S 275 406 122 M | 155 031 601 | |
| 6" | 7.5 DELUXE | 282 201 9310 | 275 468 119 S 275 468 117 S 155 327 109 R | 270-324 130-154 45 | 330 330 370 | 1 1 1 | 275 411 102 S 275 406 121 M | 155 031 601 | 155 326 102 L |
| 6" | 10 STANDARD | 282 202 9210 | 275 468 119 S 275468 120 S 155 327 102 R | 270-324 350-420 35 | 330 330 370 | 1 1 2 | 275 406 103 S 155 409 101 M | 155 031 601 | |
| 6" | 10 STANDARD | 282 202 9230 | 275 468 119 S 155 327 102 R | 270-324 35 | 330 370 | 2 2 | 275 406 103 S 155 409 101 M | 155 031 601 | |
| 6" | 10 DELUXE | 282 202 9310 | 275 468 119 S 275468 120 S 155 327 102 R | 270-324 350-420 35 | 330 330 370 | 1 1 2 | 275 406 103 S 155 409 101 M | 155 031 601 | 155 326 102 L |
| 6" | 10 DELUXE | 282 202 9330 | 275 468 119 S 155 327 102 R | 270-324 35 | 330 370 | 2 2 | 275 406 103 S 155 409 101 M | 155 031 601 | 155 326 102 L |
| 6" | 15 DELUXE | 282 203 9310 | 275 468 120 S 155 327 109 R | 350-420 45 | 330 370 | 2 3 | 275 406 103 S 155 409 102 M | 155 031 601 | 155 429 101 L |
| 6" | 15 DELUXE | 282 203 9330 | 275 468 119 S 155 327 109 R | 270-324 45 | 330 370 | 2 3 | 275 406 103 S 155 409 102 M | 155 031 601 | 155 429 101 L |
| 6" | 15 X-LARGE | 282 203 9621 | 275 468 119 S 155 327 109 R | 270-324 45 | 330 370 | 2 3 | 275 406 103 S 155 409 102 M | 155 031 601 2 required | 155 429 101 L |
- FOOTNOTES:
- (1) Surge arrestors 150 814 902 are suitable for all control boxes.
- (2) S = Start, M = Main, L = Line, R = Run. Deluxe = Control box with line contactor.
- (3) For 208-volt systems or where line voltage is between 200 volts and 210 volts, a low voltage relay is required. On 3 hp and smaller control boxes use relay part 155 031 103 in place of 155 031 102 and use the next larger cable size than specified in the 230-volt table. On 5 hp and larger use relay 155 031 602 in place of 155 031 601 and next larger wire. Boost transformers per page 15 are an alternative to special relays and cable.
- (4) Control box model 282 300 8610 is designed for use with motors having internal overload protectors. If used with a 1.5 hp motor manufactured prior to date code 06H18, Overload/Capacitor Kit 305 388 901 is required.
- (5) Control box model 282 300 8110 with date code 11C19 (March 2011) and newer contain 15 MFD run capacitor and both start and run overloads. This box is designed for use with any Franklin 1.5 hp motor.
- Menu
- << Page 50
- Page 51
- Page 52 >>